MATERIAL GUIDE
Choose HPL or compact laminate from the project conditions.
Compare construction, washroom exposure, finish intent and confirmed project requirements before final specification.
KEY FACTS
How should HPL and compact laminate be selected?
Select from the confirmed board construction, thickness, washroom exposure, cleaning, finish intent, required tests and project specification. Phenolic compact board may be a related market term, but it does not automatically prove identical construction or performance.
- HPL construction must be defined by the selected configuration
- Compact laminate is a dense solid-core direction
- Fire performance requires configuration-specific confirmation
- Board size is not the same as finished panel size
- Approved physical samples control final color and texture
| Selection factor | HPL Toilet Partitions | Compact Laminate Toilet Partitions |
|---|---|---|
| Construction direction | Decorative HPL panel configuration selected to the project specification. | Dense, solid compact laminate construction with machined edges. |
| Moisture resistance | Water-resistant configurations selected for the intended washroom environment. | Strong moisture and water resistance for humid and high-use environments. |
| Fire-performance direction | Options according to the confirmed material configuration and project specification. | No fire-performance claim unless the selected configuration is confirmed. |
| Finish flexibility | Broad decorative direction for design-led commercial interiors. | Solid, woodgrain and coordinated commercial finish directions. |
| Recommended environments | Hotels, offices and commercial projects balancing design and specification. | Schools, hospitals, malls, airports and other humid or high-use washrooms. |
| Edge direction | Edge construction follows the confirmed panel build-up. | Durable machined solid edges; final detail follows approved samples. |
Based on confirmed product information and general project coordination practice. Final construction, performance and installation requirements must be confirmed for each project.
CONFIRMED INTERNAL DATA
Specify each material as its own panel construction.
The internal catalogue lists HPL and compact laminate as separate material rows. Their thickness is therefore managed independently instead of being presented as one shared website value. Raw board sizes include 1220×1830, 1220×2440 and 1830×2440 mm; finished panel dimensions remain project-specific.
HPL direction
Confirm the HPL panel build-up, thickness, edge and any required fire-performance documentation.
Compact laminate direction
Confirm the dense solid panel thickness, machined edges and humid-environment requirements separately.
Have a material specification to review?
START A PROJECT
Need help selecting the panel system?
Include the layout drawing, opening size, quantity, panel color, hardware preference, and project country. Early-stage information is welcome.